2006 Mazda Bongo

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Underside of vehicle is heavily covered in sealer

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS

Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Crossmember (5.3.6 (a) (ii)) DANGEROUS

Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Crossmember (5.3.6 (a) (ii)) DANGEROUS

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Inner panel (6.1.1 (c) (i))

Exhaust has a minor leak of exhaust gases Rear section (6.1.2 (a))

Fuel cap/sealing device ineffective (6.1.3 (b) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner outer sills (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner outer sils (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Stop lamp(s) non-obligatory stop lamp not working high level (4.3.1 (a) (ii))

Windscreen damaged but not adversely affecting driver's view small chip drivers side (3.2 (a) (i))

Central Rear Upper Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Non obligatory mirror damaged ()

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced offside and nearside inner and outer sills and offside rear inner wheel arch (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view minor chip (3.2 (a) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Central Rear Upper Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Non obligatory mirror damaged ()

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced offside and nearside inner and outer sills and offside rear inner wheel arch (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view minor chip (3.2 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

under side of vehicle has corrossion

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

under side of vehicle has corrossion

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Driver's view to the front outside the swept area of the windscreen wipers restricted by an obstruction (3.1 (a) (i))

Offside Front front pannel starting to rust

Rear Inner Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Front Suspension component mounting prescribed area is excessively corroded cross member x2 (2.4.A.3)

Central Rear Statutory seat belt missing (5.1.1)

Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded crossember (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Rear Seat belt insecurely fixed to the seat (5.2.1a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded crossember (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Suspension component mounting prescribed area is excessively corroded outer sill x 2 (2.4.A.3)

Rear Lower Exhaust system not adequately supported (7.1.1)

Rear Suspension component mounting prescribed area is excessively corroded crossember x 2 (2.4.A.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

o/s wiper blade slight split

rear crossmember is corroded

rear exhaust is corroded & has slight blow

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Emissions not tested (7.0)

Front Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Nearside Registration plate lamp not working (1.1.C.1d)

Brake pedal anti-slip provision missing (3.3.A.1b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.5c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Child seat fitted not allowing full inspection of adult belt

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Offside Rear fog lamp missing (1.3.2a)

Parking brake lever has no reserve travel (3.1.6b)

Rear fog lamp switch missing (1.3.1a)