2007 Mazda Bongo

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SILL (6.1.1 (c) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SILL (6.1.1 (c) (i))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SILL (6.1.1 (c) (i))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced INNER SILL (6.1.1 (c) (i))

Fluid leak, but not excessive JOINTS (8.4.1 (a) (i))

HANDBRAKE TRAVEL

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Integral body structure is corroded but structural rigidity is not significantly reduced CROSS MEMBER (6.1.1 (c) (i))

Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt BOTH SIDES (2.1.3 (g) (i))

Inner Integral body structure is repaired but structural rigidity is not significantly reduced BOTH SILLS/CORRODED (6.1.1 (d) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced ALL ROUND! (6.1.1 (c) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Passenger seat(s) missing at time of test ()

Play in steering rack inner joint(s) ()

Rear Suspension component mounting prescribed area is corroded but not considered excessive BOTH SIDES (5.3.6 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement VARIOUS (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Integral body structure is corroded but structural rigidity is not significantly reduced CROSS MEMBER (6.1.1 (c) (i))

Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt BOTH SIDES (2.1.3 (g) (i))

Inner Integral body structure is repaired but structural rigidity is not significantly reduced BOTH SILLS/CORRODED (6.1.1 (d) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced ALL ROUND! (6.1.1 (c) (i))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Passenger seat(s) missing at time of test ()

Play in steering rack inner joint(s) ()

Rear Suspension component mounting prescribed area is corroded but not considered excessive BOTH SIDES (5.3.6 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement VARIOUS (5.3.4 (a) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced towing eye area (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear damper area. (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced towing eye area (6.1.1 (c) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front track rod end rubber perished

Offside Front Inner inner sill corroded.

Coolant leak ()

Rear Vehicle structure has slight corrosion crossmember (6.1.B.2)

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part insucure (3.6.B.4a)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Front Brake hose has insufficient room to move, resulting in fouling on any part insucure (3.6.B.4a)

Offside Rear fog lamp not working (1.3.2b)

Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a) DANGEROUS

Coolant leak ()

Rear Vehicle structure has slight corrosion crossmember (6.1.B.2)

corrosion underside

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear fog lamp not working (1.3.2b)

Nearside Outer Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

genral corrosion to rear

rear prop uj worn

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

genral corrosion to rear

rear prop uj worn

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear fog lamp not working (1.3.2b)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Anti-roll bar attachment bracket/mounting nut missing (2.4.G.1)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

brakes tested with tapley meter

child seats fitted at time of test

exhaust in poor condition

spare tyre is flat

Rear fog lamp not working (1.3.2b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2) DANGEROUS

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2) DANGEROUS

Windscreen washer provides insufficient washer liquid (8.2.3) DANGEROUS

brakes tested with tapley meter

child seats fitted at time of test

exhaust in poor condition

spare tyre is flat

Offside Front Body has a projection caused by damage (6.1.C.1)

Offside Front Direction indicator insecure (1.4.A.2b)

Offside Front position lamp(s) insecure (1.1.A.3a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

all brake discs corroded

rear u/j slightly worn

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

all brake discs corroded

rear u/j slightly worn