1997 BMW Z3

Emissions not tested (8.2.1.2 (d))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Horn not working (7.7 (a) (ii))

Nearside Rear Brake cable damaged (1.1.15 (a))

Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Brake cable damaged (1.1.15 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Oil leaking excessively from engine (8.4.1 (a) (i))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Body has slight corrosion (6.1.B.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Body has slight corrosion (6.1.B.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front Fluid suspension unit inappropriately repaired shock absorber damaged (2.4.A.2)

Nearside Front Fluid suspension unit leaking (2.4.D.2)

Nearside Front Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)

Offside Front Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt inner ball joint (2.4.G.2)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Body has slight corrosion (6.1.B.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Body has slight corrosion (6.1.B.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

adv. headlights slightly blurry

Front position lamp(s) has a product on the lens but not adversely affecting light output (1.1.A.3d)

Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Inner Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Sub-frame attachment slightly corroded (2.4.G.1)

Oil leak

Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced (2.4.G.1)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Front position lamp(s) has a product on the lens but not adversely affecting light output (1.1.A.3d)

Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Inner Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Sub-frame attachment slightly corroded (2.4.G.1)

Oil leak

Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Rear Exhaust has a major leak of exhaust gases (7.1.2)

Offside Rear Mechanical brake component locking device missing (3.5.1l)

Parking brake: efficiency below requirements (3.7.B.7)

Rear rear parking brake recording little or no effort (3.7.B.6a)

Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Centre Stop lamp obscured more than 50% (1.2.1c)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

front tyres worn on inside edges

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

all brake discs corroded

fronts imbalanced