1996 Honda NTV650

Exhaust noisy (8.1.1 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Stop lamp not working (4.3.1 (a) (ii))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front brake lever short

Offside Rear Footrest slightly loose (6.2.12 (a))

main stand slightly loose

Front Brake disc contaminated (1.1.14 (b))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Registration plate inscription illegible (0.1 (b))

Indicator tell tale inoperative (4.9.1 (a) (i))

Front Brake disc contaminated (1.1.14 (b))

Front Shock absorber has negligible damping effect (5.3.2 (b))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Indicator tell tale inoperative (4.9.1 (a) (i))

Front Brake excessively binding (1.2.1 (f))

Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b))

gaiters over front forks

Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

gaiters over front forks

Nail in rear tyre

Steering movement slightly 'notchy' (2.2.1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nail in rear tyre

Steering movement slightly 'notchy' (2.2.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake hose slightly kinked (3.2.B3a)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front brake hose union angle of fitment

Front wheel bearings are slightly rough (2.3.5b)

Steering movement slightly 'notchy' (2.2.1a)

Front brake hose angle of union fitment

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Brake disc(s) cracked (3.2.A1g)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)