1997 Honda Civic

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust engine idle speed too high (7.3.D.1)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Headlamp aim too high (1.8)

Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded chassis leg (2.4.A.3)

Offside Headlamp aim too high (1.8)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Rear Brakes imbalanced across an axle (3.7.B.5b)

registration plate fitted to the rear does not have black characters on a yellow background (6.3.2b)

Exhaust has a minor leak of exhaust gases centre (7.1.2)

Fuel Pipe/s corroded ()

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front coil spring corroded (2.4.C.1b)

Offside Front front brake fluctuating, but not excessively (3.7.B.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear coil spring corroded (2.4.C.1b)

Offside Rear tyre perished

Offside Rear tyre stepped

Play in steering rack inner joint(s) ()

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

cover sills fitted

front bumper loose

front cross member corroded

play at steering wheel

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Exhaust noisy (7.1.4)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Standard fitment seat belt missing

front tyres wearing thin on the inner edge

Battery insecure (1.9.1)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Exhaust noisy (7.1.4)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Standard fitment seat belt missing

front tyres wearing thin on the inner edge

4 point harnes fitted to both front seats

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Nearside Front Lower Shock absorber has a slightly worn bush (2.7.4)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Lower Shock absorber has a slightly worn bush (2.7.4)

Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Inner Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

rear seats not fitted at time of MOT test

signs of both front wheel cating inner arch but clear on lock to lock check, althought both front wheels run very close to inner arches

sill covers fitted so unable to inspect sills for corrosion

standard exhaust fitted at time of retest

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)

Nearside Rear Body insecure and dangerous to other road users (6.1.B.1b)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Nearside Side repeater has a product on the lens so it is not visible from a reasonable distance (1.4.A.2e)

Offside Headlamp aim too high (1.8)

Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Side repeater has a product on the lens so it is not visible from a reasonable distance (1.4.A.2e)

Offside Stop lamp not working (1.2.1b)

4 point harnes fitted to both front seats

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Nearside Front Lower Shock absorber has a slightly worn bush (2.7.4)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Lower Shock absorber has a slightly worn bush (2.7.4)

Offside Front Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Inner Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

rear seats not fitted at time of MOT test

signs of both front wheel cating inner arch but clear on lock to lock check, althought both front wheels run very close to inner arches

sill covers fitted so unable to inspect sills for corrosion

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

o/s n/s front floors rusted.

Brake pipe slightly corroded (3.6.B.2c)

front brake discs slightly corroded

slight play in steering rack

Nearside Headlamp aim too low (1.8)

Nearside Stop lamp not working (1.2.1b)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front front brake binding (3.7.B.1)

Offside Headlamp aim too low (1.8)

Offside Registration plate lamp not working (1.1.5c)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Nearside Headlamp aim too high when the centre of the headlamp is above 850mm from the ground (1.6.B3)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too high when the centre of the headlamp is above 850mm from the ground (1.6.B3)