MOT Status
ExpiredMileage
153,031 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Brake pipe slightly corroded (3.6.B.2c)
Both rear tyres cracking between treads.
Mask fitted nearside headlamp to rectify kick up.
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside outer sill corroded @ front, outside a prescibed area
Partial sill covers fitted offside rear & nearside rear, unable to fully inspect rear part of outer sills.
Rear subframe & components corroding.
Nearside Headlamp aim beam image kick up to the offside (1.8)
Nearside rear brake binding (3.7.B.1)
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS
Both rear tyres cracking between treads.
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside outer sill corroded @ front, outside a prescibed area
Partial sill covers fitted offside rear & nearside rear, unable to fully inspect rear part of outer sills.
Rear subframe & components corroding.
Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)
Oil leak
Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)
offside front tyre wearing on inner edge
Brakes imbalanced across an axle (3.7.B.5b)
Centre Rear Brake pipe excessively corroded (3.6.B.2c)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Headlamp aim beam image kick up to the offside (1.8)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Shock absorber casing corroded externally so the unit does not function (2.7.2a)
Nearside Rear Shock absorber has negligible damping effect (2.7.5)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Headlamp aim too low (1.8)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Stop lamp not working (1.2.1b)
Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)
Oil leak
Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)
offside front tyre wearing on inner edge
Brake pipe excessively corroded (3.6.B.2c)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Headlamp aim beam image kick up to the offside (1.8)
Nearside Rear Shock absorber casing corroded externally so the unit does not function (2.7.2a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Stop lamp not working (1.2.1b)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)
Oil leak
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
both rear shock absorber dust covers deteriorated
front bumper slightly insercue
spare wheel well/ rear pannel area corroded
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Oil leak
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
offside washer jet needs adjustment
nearside rear shock absorber corroded
offside rear shock absorber corroded
rear brake pads very low
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
nearside rear shock absorber corroded
offside rear shock absorber corroded
rear brake pads very low
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
How Reliable is the Mazda MX-3?
Based on 67,760 MOT tests across 8,694 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P464 HAR is a 1996 Mazda MX-3 in Silver with a 1,845cc petrol engine. This vehicle has been through 14 MOT tests with a personal pass rate of 64.3%.
Across all 1996 Mazda MX-3 models, the average MOT pass rate is 64.1% with a typical mileage of 86,042 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda MX-3 fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 4,172 recorded failures. If you're considering buying P464 HAR, it's worth having these areas checked by a mechanic before committing.
The Mazda MX-3 typically stays on UK roads for around 35 years. At 30 years old, this Mazda MX-3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of P464 HAR?
You can check the full history of P464 HAR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P464 HAR registered?
P464 HAR is a 1996 Mazda MX-3, first registered on 1 August 1996.
Is P464 HAR safe to buy?
The MOT history for P464 HAR shows 14 tests with a 64.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P464 HAR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P464 HAR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.