1997 Mazda MPV

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material front to rear at rear brake hose (1.1.11 (c))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced chassis leg (6.1.1 (c) (i))

Rear Brake pipe corroded, covered in grease or other material both (1.1.11 (c))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material main pipe (1.1.11 (c))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))

Central Brake pipe corroded, covered in grease or other material front to rear brake pipe (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings crossmember (6.1.B.2)

Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front Brake pad(s) has restricted free movement (3.5.1k)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake pad(s) has restricted free movement (3.5.1k)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Shock absorber has slight external damage to the casing (2.7.2a)

Offside Rear Shock absorber has slight external damage to the casing (2.7.2a)

front and rear brake discs pitted

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Shock absorber has slight external damage to the casing (2.7.2a)

Offside Rear Shock absorber has slight external damage to the casing (2.7.2a)

front and rear brake discs pitted

Brake performance not tested (3.7.A.1)

Emissions not tested (7.0)

Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake lever defective so that it cannot be satisfactorily operated (3.1.3c)

Parking brake: efficiency below requirements (3.7.C.1b)

Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Rear Rear fog lamp not working (1.3.2b)

Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Service brake: efficiency below requirements (3.7.C.1a)