MOT Status
ValidMileage
228,722 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Tyre worn close to legal limit/worn on edge inner edges (5.2.3 (e))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material @ flexible hose (1.1.11 (c))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Power steering component has slight seepage from a component rack (2.1.5 (a))
Rear Brake pipe corroded, covered in grease or other material axle (1.1.11 (c))
Vehicle structure is corroded but structural rigidity is not significantly reduced multiple locations (6.1.1 (c) (i))
Fuel system component leaking (6.1.3 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))
Offside Parking brake inoperative on one side (1.4.1 (a))
Front Tyre worn close to legal limit/worn on edge inner edges (5.2.3 (e))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material @ flexible hose (1.1.11 (c))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Power steering component has slight seepage from a component rack (2.1.5 (a))
Rear Brake pipe corroded, covered in grease or other material axle (1.1.11 (c))
Vehicle structure is corroded but structural rigidity is not significantly reduced multiple locations (6.1.1 (c) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Headlamp lens slightly defective Both (4.1.1 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Suspension component corroded but not seriously weakened assembly (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Power steering component has slight seepage from a component rack (2.1.5 (a))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Service brake efficiency below requirements (1.2.2 (a) (i))
Windscreen washer not working (3.5 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Power steering component has slight seepage from a component rack (2.1.5 (a))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Inner Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Outer Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Outer Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
rear of body rusty but not holed
Fuel system component leaking Fuel pump area (6.1.3 (b) (i))
Nearside Front Headlamp aim not tested (4.1.2 (b))
Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Rear Inner Suspension component mounting prescribed area fractured significantly reducing structural strength sill excessively corroded - within 30cm of axle mounting (5.3.6 (a) (i))
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis cross member (6.1.1 (c) (i))
Brake pipe corroded, covered in grease or other material Across rear axle (1.1.11 (c))
Nearside Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Upper Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Upper Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Vehicles underside at the rear has heavy surface corrosion
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Electrical wiring insecure and in contact with sharp edges (4.11 (a) (ii))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Nail in tyre ()
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
all suspension components corroded
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Front Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Power steering component has slight seepage from a component steering rack (2.1.5 (a))
all suspension components corroded
Front Brake pad(s) wearing thin (3.5.1g)
Front Inner Anti-roll bar linkage has slight play in a pin/bush both (2.4.G.2)
Front Subframe mounting prescribed area is corroded but not considered excessive crossmember (2.4.A.3)
Rear Propshaft universal joint worn slight ()
Rear coil spring corroded both (2.4.C.1b)
under tray fitted
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Front Inner Anti-roll bar linkage has slight play in a pin/bush both (2.4.G.2)
Front Subframe mounting prescribed area is corroded but not considered excessive crossmember (2.4.A.3)
Offside Rear Tyre worn close to the legal limit ON LIMIT (4.1.E.1)
Rear Propshaft universal joint worn slight ()
Rear coil spring corroded both (2.4.C.1b)
under tray fitted
Exhaust has a major leak of exhaust gases (7.1.2)
Offside Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Front Front position lamp(s) has a product on the lens but not adversely affecting light output (1.1.A.3d)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Front position lamp(s) has a product on the lens but not adversely affecting light output (1.1.A.3d)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Parking brake lever has little reserve travel (3.1.6b)
Nearside Front Battery insecure (1.9.1)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
Nearside Front Front position lamp(s) has a product on the lens but not adversely affecting light output (1.1.A.3d)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Front position lamp(s) has a product on the lens but not adversely affecting light output (1.1.A.3d)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Parking brake lever has little reserve travel (3.1.6b)
Offside Power steering component(s) has slight seepage from a component (2.3.3b)
Standard fitment seat belt missing
Steering column top bearing slightly worn (2.1.2c)
Nearside Headlamp aim too high (1.8)
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Headlamp aim too low (1.8)
Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Stop lamp not working (1.2.1b)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake lever has no reserve travel (3.1.6b)
Rear fog lamp not working (1.3.2b)
Offside Power steering component(s) has slight seepage from a component (2.3.3b)
Standard fitment seat belt missing
Steering column top bearing slightly worn (2.1.2c)
Nearside Rear Lower Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Oil leak
battery insecure
os sill corroded
osr light cluster damaged
rear seats not fitted at time of test
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Stop lamp emits other than a steady red light (1.2.1e)
Offside Stop lamp not working (1.2.1b)
Oil leak
battery insecure
os sill corroded
osr light cluster damaged
rear seats not fitted at time of test
Horn not working (1.6.2a)
back rear seats not fitted at time of test
os sill corroded
back rear seats not fitted at time of test
os sill corroded
Rear Tyre worn close to the legal limit (4.1.E.1)
Spare tyre defective
rear fog lamp passed following conversation with mike denman on 12/11/2007
Horn not working (1.6.2a)
Rear Rear fog lamp adversely affected by the operation of another lamp (1.3.2f)
Rear Tyre worn close to the legal limit (4.1.E.1)
Spare tyre defective
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P473 UAF is a 2006 Mazda Bongo in Grey with a 2,490cc diesel engine. This vehicle has been through 31 MOT tests with a personal pass rate of 61.3%.
Across all 2006 Mazda Bongo models, the average MOT pass rate is 66.5% with a typical mileage of 130,909 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying P473 UAF, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 20 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P473 UAF?
You can check the full history of P473 UAF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P473 UAF registered?
P473 UAF is a 2006 Mazda Bongo, first registered on 20 July 2006.
Is P473 UAF safe to buy?
The MOT history for P473 UAF shows 31 tests with a 61.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P473 UAF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P473 UAF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.