MOT Status
ExpiredMileage
203,466 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))
Central Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Offside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))
Nearside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Engine sump corroded
Exhaust system corroded
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Inner and outer sills slightly corroded
rear arches rusty rear inner sills rusty engine sump rusty
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Parking brake lever has no reserve travel (3.1.6b)
rear arches rusty rear inner sills rusty engine sump rusty
Nearside Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive wheel arch area (5.2.6)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch area (2.4.A.3)
Nearside Rear Lower Trailing arm slightly distorted (2.4.G.1)
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement all (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill area (5.2.6)
Nearside Outer Suspension component mounting prescribed area is excessively corroded sill area (2.4.A.3)
Offside Front Seat belt retracting mechanism defective (5.2.5b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Outer Seat belt anchorage prescribed area is excessively corroded sill area (5.2.6)
Offside Outer Suspension component mounting prescribed area is excessively corroded sill area (2.4.A.3)
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded wheel arch area (5.2.6)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch area (2.4.A.3)
Parking brake lever has no reserve travel (3.1.6b)
Nearside Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive wheel arch area (5.2.6)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch area (2.4.A.3)
Nearside Rear Lower Trailing arm slightly distorted (2.4.G.1)
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement all (2.4.G.2)
Nail in nearside front tyre
Parking brake lever has little reserve travel (3.1.6b)
n/s rear wfeel ardh in early state of corrosion near to seat belt and suspensiom mount piont area
Nearside Inner Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Lower Suspension arm worn and seriously weakened (2.4.G.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Inner Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Inner Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
offside front sidelight slightly dull?
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
offside front sidelight slightly dull?
Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Front constant velocity joint gaiter deteriorated (2.5.C.1a)
How Reliable is the Mazda 626?
Based on 311,592 MOT tests across 41,549 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P474 AHR is a 1997 Mazda 626 in Blue with a 1,839cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 72.2%.
Across all 1997 Mazda 626 models, the average MOT pass rate is 66.2% with a typical mileage of 100,302 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 626 fails its MOT is parking brake: efficiency below requirements, accounting for 25,332 recorded failures. If you're considering buying P474 AHR, it's worth having these areas checked by a mechanic before committing.
The Mazda 626 typically stays on UK roads for around 37 years. At 29 years old, this Mazda 626 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P474 AHR?
You can check the full history of P474 AHR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P474 AHR registered?
P474 AHR is a 1997 Mazda 626, first registered on 28 February 1997.
Is P474 AHR safe to buy?
The MOT history for P474 AHR shows 18 tests with a 72.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P474 AHR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P474 AHR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.