2006 Mazda Bongo

Both Rear Lights Damaged

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill X2 (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill x2 (5.3.6 (a) (i))

Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Both Rear Lights Damaged

Both Rear Light Units Damaged

Nearside Rear Wheel Arch Rusted

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front panel (5.3.6 (a) (i))

Offside Headlamp lens seriously defective (4.1.1 (b) (ii))

Front Position lamp incorrect colour (4.2.3 (a) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside inner sill

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

n/s/r light unit damaged

Offside Rear tyre 10 years old

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

both rear light units damaged

hand brake travel

Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Offside Rear tyre 10 years old

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

both rear light units damaged

hand brake travel

Nearside Front Outer Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Lower Anti-roll bar linkage damaged and seriously weakened (5.3.3 (b) (i))

Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Rear Lower Anti-roll bar linkage damaged but not seriously weakened (5.3.3 (b) (i))

Offside Front Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Rear fog lamp lens defective which has no effect on emitted light (4.5.1 (b) (i))

Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear fog lamp lens defective which has no effect on emitted light (4.5.1 (b) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Registration plate lamp not working (1.1.C.1d)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

nearside rear tyre has small split on inner sidewall at time of test

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

unable to see full condition of rear pads

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Fuel cap/sealing device mounting flange/sealing method defective (7.2.4c)

unable to see full condition of rear pads