MOT Status
ExpiredMileage
125,172 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake load sensing valve seized (3.6.E.3)
Brake valve insecurely mounted (3.6.A.2a)
Front engine mounting deteriorated resulting in excessive movement (6.1.D.1a)
Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp not working on main beam (1.7.5a)
Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
rear brake application uneven (3.7.B.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Outer Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)
Oil leak
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
offside rear tyre wearing on inner edge
All welding repairs covered in underseal - appear sound
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear coil spring corroded (2.4.C.1b)
Rear fog lamp switch must be in the marked "off" position or "on" (tell tale illuminated) position for dip beam headlamps to work.
centre front seat belt webbing routed incorrectly
engine oil on minimum
o/s sill flange corroded - just outside a seat belt prescribed area
Brake pipe inadequately clipped (3.6.B.1)
Fuel cap/sealing device mounting flange/sealing method defective (7.2.4c)
Headlamp switch faulty (1.7.1)
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Brake pipe inadequately clipped (3.6.B.1)
Offside Front Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear coil spring corroded (2.4.C.1b)
centre front seat belt webbing routed incorrectly
engine oil on minimum
o/s sill flange corroded - just outside a seat belt prescribed area
Nearside Front Shock absorber insecure (2.7.2b)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Headlamp not working on main beam (1.7.5a)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Front Windscreen washer control is inaccessible to the driver (8.2.1a)
Fuel cap/sealing device sealing washer missing (7.2.4c)
Horn not working (1.6.2a)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front Headlamp not working on main beam (1.7.5a)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front front brake juddering severely (3.7.A.2b)
Rear brake disc excessively scored (3.5.1h)
Emissions not tested (7.0)
Nearside Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Brake pipe excessively corroded (3.6.B.2c)
Offside Inner Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
engine noisey on tickover.
no clutch pedel
Emissions not tested (7.0)
Nearside Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front brake disc excessively pitted (3.5.1h)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Brake pipe excessively corroded (3.6.B.2c)
Offside Front brake disc excessively pitted (3.5.1h)
Offside Inner Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Electrical wiring damaged/contaminated
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
bump start vehicle all of the time.
engine noiesy on tickover.
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P502 BCK is a 1997 Mercedes-benz Vito in Red with a 2,299cc diesel engine. This vehicle has been through 13 MOT tests with a personal pass rate of 46.2%.
Across all 1997 Mercedes-benz Vito models, the average MOT pass rate is 61.5% with a typical mileage of 128,604 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying P502 BCK, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 29 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of P502 BCK?
You can check the full history of P502 BCK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P502 BCK registered?
P502 BCK is a 1997 Mercedes-benz Vito, first registered on 21 May 1997.
Is P502 BCK safe to buy?
The MOT history for P502 BCK shows 13 tests with a 46.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P502 BCK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P502 BCK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.