MOT Status
ExpiredMileage
249,978 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Outer Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Outer Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Outer Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Outer Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))
Nearside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i))
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch (6.2.2 (d) (i))
Offside Rear Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i))
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill & chassis (6.2.2 (d) (i))
Offside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))
Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting crossmember (6.2.2 (d) (i))
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))
Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))
Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Nearside Rear Outer Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Outer Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Outer Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))
Offside Front Power steering component has slight seepage from a component (2.1.5 (a))
Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Nearside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Windscreen wiper does not clear the windscreen effectively split (3.4 (b) (ii))
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill area (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member near radiator (5.3.6 (a) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively split (3.4 (b) (ii))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Rear fog lamp tell-tale missing (4.9.1 (a) (ii))
Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Outer Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))
Offside Front Power steering component has slight seepage from a component (2.1.5 (a))
Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
under body corrion
Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member holed (6.2.2 (d) (i))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
under body corrion
Front Body has slight corrosion cross member (6.1.B.2)
Nearside Front Child Seat fitted not allowing full inspection of adult belt ()
Nearside Front Inner Body has slight corrosion sill (6.1.B.2)
Oil leak ()
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Front Electrical wiring insecure drivers footwell (1.9.2a)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Headlamp not working on main beam (1.7.5a)
Nearside Front Obligatory mirror insecure (8.1.1)
Nearside Front Registration plate lamp not illuminating the registration plate (1.1.C.1e)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Front Body has slight corrosion cross member (6.1.B.2)
Nearside Front Child Seat fitted not allowing full inspection of adult belt ()
Nearside Front Inner Body has slight corrosion sill (6.1.B.2)
Nearside Front Outer Tyre worn close to the legal limit (4.1.E.1)
Offside Front Outer Tyre worn close to the legal limit (4.1.E.1)
Oil leak ()
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
Under-trays fitted obscuring some underside components
all tyres have 3mm of tread on them not far off the limit
Nearside Rear Seat belt stitching slightly frayed (5.2.2b)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
nearside front tyre has slight outer edge wear
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Seat belt stitching slightly frayed (5.2.2b)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
nearside front tyre has slight outer edge wear
oil leak
slight bind to front brakes
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear brake disc contaminated by oil (3.5.1h)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear brake disc contaminated by oil (3.5.1h)
Rear fog lamp tell tale not working (1.3.1b)
oil leak
slight bind to front brakes
Nearside Registration plate lamp not working (1.1.5c)
Offside Rear fog lamp insecure (1.3.2a)
Offside Rear fog lamp not working (1.3.2b)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P506 FTT is a 2007 Mazda Bongo in Blue with a 2,500cc diesel engine. This vehicle has been through 30 MOT tests with a personal pass rate of 60%.
Across all 2007 Mazda Bongo models, the average MOT pass rate is 66.1% with a typical mileage of 134,152 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying P506 FTT, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 19 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P506 FTT?
You can check the full history of P506 FTT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P506 FTT registered?
P506 FTT is a 2007 Mazda Bongo, first registered on 24 May 2007.
Is P506 FTT safe to buy?
The MOT history for P506 FTT shows 30 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P506 FTT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P506 FTT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.