1997 Volkswagen Multivan

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Brake pipe corroded, covered in grease or other material front to rear and front to brake hose pipes coated in underseal (1.1.11 (c))

Front Brake pipe corroded, covered in grease or other material corroded, pipe from hose to caliper , both sides (1.1.11 (c))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced front of inner sill (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced floor at rear by x member (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

steering rack mounting bushes slight wear

Brake performance not tested due to burst o/s/r brake pipe (1.2.1 (g))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor above silencer (spring mount) (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber upper mounting (5.3.6 (a) (i))

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting x member (6.1.6 (i) (i))

Offside Rear Brake hose ferrule excessively corroded from body to arm (1.1.12 (f) (i))

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting x member (6.1.6 (i) (i))

Offside Rear Brake pipe leaking on a hydraulic braking system on rear suspension arm, corroded in mounting clip (1.1.11 (b) (ii)) DANGEROUS

Brake pipe corroded, covered in grease or other material front to rear and front to brake hose pipes coated in underseal (1.1.11 (c))

Front Brake pipe corroded, covered in grease or other material corroded, pipe from hose to caliper , both sides (1.1.11 (c))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced front of inner sill (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced floor at rear by x member (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

steering rack mounting bushes slight wear

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Upper Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Front Upper Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Upper Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Central Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member excessively corroded (6.1.1 (c) (i))

Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill has 3 corrosion holes marked with chalk (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch has corrosion hole marked with chalk (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Inner sill corroded

Offside Brake pipe slightly corroded front to rear (3.6.B.2c)

front x member corroded

Both front tyres wearing on outer edges

Service brake: efficiency below requirements (3.7.B.7)

Both front tyres wearing on outer edges

Nearside Front Anti-lock braking system component slightly damaged abs signal ring (3.4.2)

service brake efficiency only just met. 50%

front to rear metal brake pipes slightly corroded

Nearside Headlamp aim beam image kick up to the offside (1.8)

Offside Headlamp aim beam image kick up to the offside (1.8)

Offside Rear fog lamp not working (1.3.2b)

front to rear metal brake pipes slightly corroded