MOT Status
ExpiredMileage
91,049 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Fuel tank damaged
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Headlamp aim unable to be tested (4.1.2 (b))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Fuel tank damaged
Nearside Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Lower radiator support welded and tow eyes removed
Front subframe corroded
Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Oil leak, but not excessive (8.4.1 (a) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt drop link (5.3.4 (b) (ii))
Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill panel (7.1.1 (a) (i))
Nearside Rear Body component corroded and likely to cause injury wheel arch sharp edges (6.2.1 (a) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt drop link (5.3.4 (b) (ii))
Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill panel (7.1.1 (a) (i))
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill panel (7.1.1 (a) (i))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Front subframe corroded
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Rear axle corroded
Rear both arches corroded
exhaust deteriorated
Brake performance not tested due to oil leak (1.2.1 (g))
Front Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Oil leaking continuously from transmission posing a serious risk to road safety (8.4.1 (a) (ii)) DANGEROUS
Rear Brake disc in such a condition that it is seriously weakened both (1.1.14 (a) (ii)) DANGEROUS
Rear Brake pad(s) less than 1.5 mm thick both sides (1.1.13 (a) (ii)) DANGEROUS
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Rear axle corroded
Rear both arches corroded
exhaust deteriorated
Front crossmember corroded
reverse light not working
Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Front crossmember corroded
oil warning lamp light on
reverse light not working
Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (5.2.6)
Nearside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Outer Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (5.2.6)
Offside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Horn not working (1.6.2a)
Offside Front Direction indicator not working (1.4.A.2c)
Offside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Parking brake: efficiency below requirements (3.7.C.1b)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Rear Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Horn not working (1.6.2a)
Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Rear Brake pad(s) wearing thin (3.5.1g)
o/s/r bump stop rubber missing
Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front constant velocity joint is insecure (2.5.C.1b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
o/s/r bump stop rubber missing
Rear exhaust slightly deteriorated
Underside of vehicle has surface corrosion
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Rear fog lamp not working (1.3.2b)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Rear exhaust slightly deteriorated
Underside of vehicle has surface corrosion
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Suspension joint nearside lower dust cover split/missing
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P533 FTT is a 2007 Mazda Bongo in White with a 2,490cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 63%.
Across all 2007 Mazda Bongo models, the average MOT pass rate is 66.1% with a typical mileage of 134,152 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying P533 FTT, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 19 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P533 FTT?
You can check the full history of P533 FTT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P533 FTT registered?
P533 FTT is a 2007 Mazda Bongo, first registered on 13 June 2007.
Is P533 FTT safe to buy?
The MOT history for P533 FTT shows 27 tests with a 63% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P533 FTT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P533 FTT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.