1996 Ford Freda

Suspension component mounting prescribed area is corroded but not considered excessive all (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal all (5.3.6 (a) (i))

Front Anti-roll bar linkage ball joint has slight play both (5.3.4 (a) (i))

Front Suspension arm ball joint has slight play both (5.3.4 (a) (i))

Front Track rod end ball joint has slight play both (2.1.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive all (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal all (5.3.6 (a) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced ns and os inner sills (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Central Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Body panel slightly loose tail gate (6.2.1 (a) (i))

Nearside Rear Exhaust has a minor leak of exhaust gases flexible (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Central Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i))

Headlamp aim not tested (4.1.2 (b))

Horn not working (7.7 (a) (ii))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear fog lamp not working (1.3.2b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill (6.1.B.2)

Nearside Rear Body has a sharp edge caused by corrosion wheel arch (6.1.C.1)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner and outer sill (6.1.B.2)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Body has a sharp edge caused by corrosion wheel arch (6.1.C.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Headlamp deteriorated but light output not reduced both (1.7.5a)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Exhaust emits excessive smoke or vapour of any colour (7.4.B.4)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Inner Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Inner Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Rear fog lamp missing (1.3.2a)

Front Headlamp deteriorated but light output not reduced both (1.7.5a)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Rear fog lamp not working (1.3.2b)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Rear fog lamp not working (1.3.2b)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)