MOT Status
ExpiredMileage
99,777 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front registration plate deteriorated (6.3.1d)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Rear registration plate deteriorated (6.3.1d)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front coil spring corroded (2.4.C.1b)
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear coil spring corroded (2.4.C.1b)
Centre Exhaust system not adequately supported (7.1.1)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Seat belt stitching slightly frayed (5.2.2b)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Exhaust has part of the system excessively deteriorated (7.1.1a)
Nearside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Seat belt stitching slightly frayed (5.2.2b)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
vehicle subframes have started to corrode
vehicle subframes have started to corrode
both front tyres perished side walls.o,s,r.tyre perished at edge of tread.
Offside Front Front position lamp(s) not working (1.1.A.3b)
both front tyres perished side walls.o,s,r.tyre perished at edge of tread.
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P598 GEY is a 1996 Mazda 323 in Green with a 1,489cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 53.8%.
Across all 1996 Mazda 323 models, the average MOT pass rate is 64.7% with a typical mileage of 96,639 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying P598 GEY, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 30 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P598 GEY?
You can check the full history of P598 GEY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P598 GEY registered?
P598 GEY is a 1996 Mazda 323, first registered on 2 August 1996.
Is P598 GEY safe to buy?
The MOT history for P598 GEY shows 13 tests with a 53.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P598 GEY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P598 GEY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.