1996 Mazda 323

Exhaust engine idle speed too high (7.3.D.1)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Front drive shaft damaged (2.5.C.2a)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Outer Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside rear brake binding (3.7.B.1)

Rear Brake pipe excessively corroded (3.6.B.2c) DANGEROUS

Considerable corrosion to the rear suspsension trailing arms

Corrosion to the complete rear suspension

Corrosion to the fuel filler neck and pipes

Engine oil leak

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

corrosion on fuel filler neck

corrosion on rear suspension trailing arms also on verious other arms and nuts and bolts on rear suspension

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Rear wheel bearing rough when rotated (2.6.1)

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

corrosion on fuel filler neck

corrosion on rear suspension trailing arms also on verious other arms and nuts and bolts on rear suspension

Nearside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

all suspension components have been advised to the customer of the extent of its deteriotion

both rear road wheel inner rims distorted

fuel tank filler neck corroded

rear suspension mounting points corroded/deterioted

Exhaust system not adequately supported (7.1.1)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

all the rear suspension is corroded/deterioted but unable to identify any weakend points

both rear road wheel inner rims distorted

fuel tank filler neck corroded

rear suspension mounting points corroded/deterioted

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

slight corrosion on all rear suspension components

Nearside Inner Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

slight corrosion on all rear suspension components

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front coil spring fractured (2.4.C.1a)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

centre exhaust mount broken

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Exhaust system not adequately supported (7.1.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Registration plate lamp not working (1.1.C.1d)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

slight wear and deterioration in all four brake disc

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

deterioration on o/s and n/s rear brake disc

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

deterioration on o/s and n/s rear axle tie rods

Exhaust system not adequately supported (7.1.1)

Nearside Front brake disc excessively pitted (3.5.1h)

Nearside Front front brake binding (3.7.B.1)

Nearside Rear Shock absorber has negligible damping effect (2.7.5)

Offside Rear Shock absorber has negligible damping effect (2.7.5)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

deterioration on n/s front wiper rubber

deterioration on o/s and n/s rear axle tie rods

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Mechanical brake component has restricted free movement (3.5.1k)

Rear Exhaust system not adequately supported (7.1.1)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Emissions not tested (7.0)

Nearside Registration plate lamp not working (1.1.5c)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)