2006 Mazda Bongo

Exhaust has a minor leak of exhaust gases Middle to rear joint (6.1.2 (a))

Headlamp lens slightly defective Both (4.1.1 (b) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Both rear outer sill (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases Middle to rear joint (6.1.2 (a))

Headlamp aim projected beam image is obviously incorrect Both (4.1.2 (c))

Headlamp lens slightly defective Both (4.1.1 (b) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Both rear outer sill (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

different tyre size front and rear matched on axles

Offside Front Suspension component mounting prescribed area is excessively corroded out rigger (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Brake pad(s) wearing thin all round n/s/f lower than o/s f (3.5.1g)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Body has slight corrosion (6.1.B.2)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Oil leak

bonnet stay missing

wheel covers fitted, wheel nuts not checked

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Anti-roll bar linkage fractured (2.4.G.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Body has slight corrosion (6.1.B.2)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Oil leak

bonnet stay missing

wheel covers fitted, wheel nuts not checked

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Stop lamp not working (1.2.1b)

Offside Front Direction indicator insecure (1.4.A.2b)

Offside Front Front position lamp(s) insecure (1.1.A.3a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Stop lamp not working (1.2.1b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Coolant leak

Engine covers fitted obscuring some components in the engine bay

Front Brake pad(s) wearing thin (3.5.1g)

Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Spare tyre defective

front brake fluctuating, but not excessively (3.7.B.3)

rear brake fluctuating, but not excessively (3.7.B.3)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)

Power steering component(s) has slight seepage from a component (2.3.3b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)

Power steering component(s) has slight seepage from a component (2.3.3b)

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Stop lamp not working (1.2.1b)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Stop lamp not working (1.2.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Side repeater not working (1.4.A.2c)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)