1997 Honda Civic

Emissions not tested (8.2.1.2 (d))

Front Brake pipe excessively corroded to rear pipes (1.1.11 (c))

Nearside Front Bumper insecure (6.1.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner sill (5.3.6 (a) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear fog lamp light intensity significantly reduced (4.5.4 (a))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Play in steering rack inner joint(s) ()

Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sills and chassis (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Brake pipe slightly corroded to rear (3.6.B.2c)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

exhaust corroding

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Stop lamp not working (1.2.1b)

Registration plate lamp not working (1.1.C.1d)

Front Brake pipe slightly corroded to rear (3.6.B.2c)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

exhaust corroding

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)

Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Nearside Rear Subframe mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Subframe mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Steering rack gaiter deteriorated (2.2.D.2d)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

front and rear bumper damage

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)