MOT Status
ValidMileage
161,774 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
both inner sill corroded
under side corroded
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))
Nearside Rear Body panel corroded and likely to cause injury arch (6.2.1 (a) (i))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
all over under body and brake pipes covered with black under seal obscuring some components
under body and engine covers fitted obscuring some components
Central Rear Stop lamp not working (1.2.1b)
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor (6.1.B.2)
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings under wheel arch (6.1.B.2)
Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill to floor (6.1.B.2)
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
all over under body and brake pipes covered with black under seal obscuring some components
under body and engine covers fitted obscuring some components
Horn-push only working on one button.
Import size reg. plates fitted.
Horn not working (1.6.2a)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Headlamp aim not tested (1.8.A.1c)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Headlamp not working on main beam (1.7.5a)
Offside Front Lower Subframe mounting prescribed area is excessively corroded X member under radiator (2.4.A.3)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Headlamp excessively damaged so that the light output is severely reduced (1.7.5a)
Import size reg. plates fitted.
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Fuel system component leaking (7.2.3)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
nearside front tyre perished badly/inner sidewall splitting ?? brakes tapley tested only,
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside rear axle leaking oil .
Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Inner Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Inner Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Outer Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Inner Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Headlamp not in good working order but not adversely affecting beam image (1.2.4a)
Offside Front Headlamp not in good working order but not adversely affecting beam image (1.2.4a)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P629 FTA is a 1996 Mazda Bongo in Blue with a 2,490cc diesel engine. This vehicle has been through 24 MOT tests with a personal pass rate of 75%.
Across all 1996 Mazda Bongo models, the average MOT pass rate is 65.9% with a typical mileage of 133,482 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying P629 FTA, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 30 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of P629 FTA?
You can check the full history of P629 FTA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P629 FTA registered?
P629 FTA is a 1996 Mazda Bongo, first registered on 31 December 1996.
Is P629 FTA safe to buy?
The MOT history for P629 FTA shows 24 tests with a 75% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P629 FTA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P629 FTA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.