1996 Mazda Bongo

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Power steering component leaking (2.1.5 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Outer Suspension component mounting prescribed area damaged but not considered excessive door sill (5.3.6 (a) (i))

engine oil leak

extensive welding repairs to underside

Nearside Headlamp aim projected beam image is obviously incorrect [no image] (4.1.2 (c))

Nearside Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength door sill (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect [no image] (4.1.2 (c))

Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Anti-roll bar pin or bush excessively worn [drop link] (5.3.4 (a) (i))

Suspension component mounting prescribed area excessively damaged significantly reducing structural strength front cross member (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Outer Suspension component mounting prescribed area damaged but not considered excessive door sill (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

both rear wheel arches corroding

nearside outer door sill corroded

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Inner Suspension component mounting prescribed area is excessively corroded door sill (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded front cross member (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Nearside Rear position lamp(s) excessively damaged so that it is not visible from a reasonable distance (1.1.A.3d)

Nearside Stop lamp not working (1.2.1b)

Offside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Stop lamp not working (1.2.1b)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear Exhaust has part of the system excessively deteriorated (7.1.1a)

Rear Exhaust system not adequately supported (7.1.1)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)