MOT Status
ValidMileage
95,259 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge slight worn on outer edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Front inner sill corroded/holed
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front inner sill corroded/holed
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Anti-roll bar linkage ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))
Front Lower Suspension arm ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Outer sill (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge Worn on inner edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Rear Anti-roll bar attachment bracket/mounting damaged and seriously weakened (5.3.3 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge Worn on inner edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside rear and offside front outer sills corroded
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt upper and lower gaiters (5.3.4 (b) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt upper and lower gaiters (5.3.4 (b) (ii))
Nearside rear and offside front outer sills corroded
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Child Seat fitted not allowing full inspection of adult belt ()
Central Exhaust has a major leak of exhaust gases flexi (7.1.2)
Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Child Seat fitted not allowing full inspection of adult belt ()
Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Service brake: efficiency below requirements (3.7.B.7)
Front BOTH front tyres side walls cracking
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords nail in tyre (4.1.D.1a)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Front BOTH front tyres side walls cracking
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Exhaust has a major leak of exhaust gases (7.1.2)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Side repeater not working (1.4.A.2c)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Seat belt insecurely fixed to the vehicles structure (5.2.1a)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda MPV?
Based on 44,611 MOT tests across 3,157 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P641 EAB is a 1997 Mazda MPV in Silver with a 2,261cc diesel engine. This vehicle has been through 30 MOT tests with a personal pass rate of 66.7%.
Across all 1997 Mazda MPV models, the average MOT pass rate is 66.8% with a typical mileage of 132,784 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MPV fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,975 recorded failures. If you're considering buying P641 EAB, it's worth having these areas checked by a mechanic before committing.
The Mazda MPV typically stays on UK roads for around 31 years. At 29 years old, this Mazda MPV is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of P641 EAB?
You can check the full history of P641 EAB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P641 EAB registered?
P641 EAB is a 1997 Mazda MPV, first registered on 31 December 1997.
Is P641 EAB safe to buy?
The MOT history for P641 EAB shows 30 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P641 EAB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P641 EAB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.