2006 Mazda Bongo

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

corrosion to underside of vehicle in areas

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive Engine (8.4.1 (a) (i))

Underbody corrosion

Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Nearside Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (6.2.2 (d) (i))

Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (6.2.2 (d) (i))

Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Power steering malfunctioning (2.1.5 (a))

Nearside Rear Outer Vehicle structure is corroded but structural rigidity is not significantly reduced arch (6.1.1 (c) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Battery insecure (1.9.1)

Horn not working (1.6.2a)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Anti-roll bar attachment bracket/mounting worn and its strength is seriously reduced (2.4.G.1)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front Tyre worn close to the legal limit both (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak ()

Rear Brake pad(s) wearing thin (3.5.1g)

front tyres wearing on edge

Body has slight corrosion (6.1.B.2)

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Seat belt stitching slightly frayed (5.2.2b)

Offside Rear Upper Brake pipe slightly corroded (3.6.B.2c)

Upper Body has slight corrosion (6.1.B.2)

coolant pipe leaking

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

coolant pipe leaking

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Fuel system component leaking (7.2.3)

Nearside Front Anti-roll bar linkage worn and seriously weakened (2.4.G.1)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Wheel nut(s) loose (4.2.A.1e)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front constant velocity joint gaiter split (2.5.C.1a)