1997 Rover Mini

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Brake pipe slightly damaged (1.1.11 (c))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear subframe bush slight perishing

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Offside Front Upper Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Hazard warning switch faulty (4.4.2 (a) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced Floor (6.1.1 (c) (i))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Outer Integral body structure is modified but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.2.2 (a) (i))

Nearside Front Wheel/tyre protruding beyond wheel arch ()

Nearside Rear Wheel/tyre protruding beyond wheel arch ()

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Wheel/tyre protruding beyond wheel arch ()

Offside Rear Wheel/tyre protruding beyond wheel arch ()

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor pan (6.1.B.2)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded shock absorber (2.4.A.3)

Nearside Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Nearside Rear Subframe mounting prescribed area is excessively corroded sub frame mount (2.4.A.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

registration plate fitted to the front does not have black characters on a white background (6.3.2a)

registration plate fitted to the rear does not have black characters on a yellow background (6.3.2b)

Body has slight corrosion battery box (6.1.B.2)

Body has slight corrosion floor pan (6.1.B.2)

Body has slight corrosion sill (6.1.B.2)

Brake pipe slightly corroded front-rear (3.6.B.2c)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Direction indicator slightly discoloured (1.4.A.2f)

Nearside Front engine mounting bracket not fully secure (6.1.D.1b)

Nearside Front tyre deteriorating and has cuts in outer wall but not to cords

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Body has slight corrosion sill (6.1.B.2)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive shock absorber (2.4.A.3)

Offside Front tyre deteriorating and has cuts in outer wall but not to cords

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sub frame mount (2.4.A.3)

exhaust deteriorating

item in drivers view prior to test

Corrosion to nearside outer sill

Corrosion to offside front inner wing panel

Heaviiy corrosion to offside rear inner wheel arch

Heaviy corrosion to offside outer sill

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside front tyre damaged on tread & has signs of fouling on edges of wing

Rear subframe corroded

Slight corrosion to both front floor pans

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Rear reflector missing (1.5.1a)

Offside Rear reflector missing (1.5.1a)

Corrosion to nearside outer sill

Corrosion to offside front inner wing panel

Heaviiy corrosion to offside rear inner wheel arch

Heaviy corrosion to offside outer sill

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside front tyre damaged on tread & has signs of fouling on edges of wing

Rear subframe corroded

Slight corrosion to both front floor pans

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Front wheel bearing has slight play (2.5.A.3c)

corrnceosion to front valance

corrnceosion to rear valance

Nail in offside rear tyre

Nearside Front wheel bearing has slight play (2.5.A.3c)

Offside Brake pipe slightly corroded (3.6.B.2c)

corrosion to both outer sills

corrosion to offside floor pan

heavy corrosion and hole in offside front floor pan not within prescribed areas

heavy corrosion and hole in offside front outer sill not within prescribed areas

heavy corrosion and holes in both front inner wheel arches not within prescribed areas

rear registration plate slightly fadded

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Headlamp aim too low (1.8)

rear registration plate slightly fadded