1997 Kawasaki ZX-7R

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Slight cut in rear tyre but is below 25mm & is not exposing cord

Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Slight cut in rear tyre but is below 25mm & is not exposing cord

Engine kill switch inoperative

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Engine kill switch inoperative

Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort (3.3.A1c)

Offside Headlamp aim too high and too far to the right. (1.6)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Lighting test shows dipbeam bulb out of focus .

Brake test indicates probability of air in system

Chain guard missing

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake disc(s) slightly scored (3.2.A1l)

Front Brake disc(s) has slight run out (3.2.A1m)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear reflector on motorcycle missing (1.4.1)

Front Brake disc(s) has slight run out (3.2.A1m)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Brake disc(s) is slightly distorted (3.2.A1m)

Front Roller brake test indicates a slightly grabbing brake (3.3.A1b)

note:alu brake banjo bolts fitted

Offside Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.2)

Rear Brake hose excessively kinked (3.2.B3a)

Rear Brake hose excessively twisted (3.2.B3a)

Exhaust noisy (7.1.2)