1997 Volkswagen Caddy

Brake pipe corroded, covered in grease or other material front to rear pipes (1.1.11 (c))

Nearside Front Brake hose slightly twisted (1.1.12 (b) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake hose slightly twisted (1.1.12 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced near suspension mounting (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

bonnet corroded

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Inner Integral body structure inadequately repaired such that structural rigidity is significantly reduced door sill to floor (6.1.1 (d) (i))

Nearside Side repeater missing (4.4.1 (a) (ii))

Offside Rear Brake modification unsafe bleed nipple replaced with a bolt (1.1.21 (d) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Brake pipe corroded, covered in grease or other material front to rear pipes (1.1.11 (c))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Nearside Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced near suspension mounting (6.1.1 (c) (i))

bonnet corroded

brake pedal spongey

park brake lever travel high

Front Bumper insecure ()

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear coil spring corroded (2.4.C.1b)

Oil leak ()

baffles loose in rear exhaust silencer

All position lamps not working (1.1.A.3b)

Brake load sensing valve linkage seized (3.6.E.3)

Exhaust system not adequately supported rear mountings broken (7.1.1)

Horn not working (1.6.2a)

Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear Inner Subframe mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Inner Subframe mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear fog lamp tell tale not working (1.3.1b)

Front Bumper insecure ()

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear coil spring corroded (2.4.C.1b)

Oil leak ()

baffles loose in rear exhaust silencer

Nearside Rear coil spring corroded (2.4.C.1b)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)

Offside Rear coil spring corroded (2.4.C.1b)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)

Oil leak ()

Rear Brake pipe slightly corroded (3.6.B.2c)

Horn not working (1.6.2a)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Side repeater missing (1.4.A.2b)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Rear Exhaust system not adequately supported (7.1.1)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Body has a sharp edge caused by corrosion (6.1.C.1)

Front Direction indicators incorrect colour (1.4.A.2f)

Front Headlamp aim too low (1.8)

Nearside Front Lower Front suspension locking device missing (2.5.A.4)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Rear Brake load sensing valve linkage seized (3.6.E.3)

rear brake recording little or no effort (3.7.B.5a)

Brake pipe slightly corroded (3.6.B.2c)

Offside Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear Hand operated control valve excessively corroded (3.2.1a) DANGEROUS

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Hand operated control valve excessively corroded (3.2.1a)

Nearside Front Upper Macpherson strut upper support bearing is stiff in operation (2.5.B.1b)

Nearside Hand operated control valve excessively corroded (3.2.1a)

Offside Front Upper Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Offside Rear Hand operated control valve excessively corroded (3.2.1a)