2007 Mazda Bongo

Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arm mount (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material all pipes coated (1.1.11 (c))

Central Oil leak, but not excessive (8.4.1 (a) (i))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

heavily undersealed

Brake pipe corroded, covered in grease or other material all pipes coated (1.1.11 (c))

Rear Passenger seat(s) missing at time of test ()

heavily undersealed

suspension components heavily undersealed

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Brake pipe corroded, covered in grease or other material all pipes coated (1.1.11 (c))

Front Subframe mounting prescribed area is corroded but not considered excessive n/s and o/s (5.3.6 (a) (i))

Front Suspension spring mounting prescribed area is corroded but not considered excessive n/s and o/s (5.3.6 (a) (i))

Offside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Passenger seat(s) missing at time of test ()

suspension components corroded

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt and lower (5.3.4 (b) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material all pipes coated (1.1.11 (c))

Front Upper Subframe mounting prescribed area is corroded but not considered excessive n/s and o/s (5.3.6 (a) (i))

Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive n/s and o/s (5.3.6 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

all suspension components corroded

inner sills corroded

outer sills corroded

Front Registration plate missing (0.1 (a))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Suspension component mounting repair covered in underseal filler in outer sill (5.3.6 (a) (i))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened outer face corroded (1.1.14 (a) (ii))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis and chassis to wheel arch liner (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Passenger seat(s) missing at time of test rear most and seatbelts ()

fuel filter damp

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security outer sill (6.2.2 (d) (i))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Rear fog lamp missing (4.5.1 (a) (ii))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)

Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear bush (2.4.G.2)

nearside front fog lamp not working

slight underbody corrosion

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

nearside front fog lamp not working

underbody corrosion

underbody corrosion

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

underbody corrosion