1996 Mazda MPV

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Headlamp reflector slightly defective (4.1.1 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Outer Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp reflector slightly defective (4.1.1 (b) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Headlamp reflector slightly defective (4.1.1 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Outer Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Headlamp reflector slightly defective (4.1.1 (b) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear both rear axle top arms corroding

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

inner and outer sills are very corroded .

Nearside Headlamp aim too high (1.8)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Both inner and outer sills corroded through

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Main beam 'tell-tale' not working (1.7.4c)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Headlamp not working on main beam (1.7.5a)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Horn not working (1.6.2a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Oil leak

N/S BATTERY INSECURE

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Headlamp has a product on the light source so that the light output is severely reduced (1.7.5a)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Headlamp has a product on the light source so that the light output is severely reduced (1.7.5a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

N/S BATTERY INSECURE

N/S CENTRE SILL INNER CORRODED

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

TOW BAR WIRING ADRIFT

corrosion in osf inner sill and os outer sill

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)