2016 Honda VT750

Exhaust noisy (8.1.1 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Front Tyre worn close to the legal limit 1.25mm (5.2.3 (e))

Front handle bar bushes very slight wear

Registration plate deteriorated but not likely to be misread (0.1 (b))

Handlebar mounting insecure (2.2.1 (a) (i))

Offside Front Footrest insecure mounting plate bolts loose (6.2.12 (a))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Exhaust noisy (8.1.1 (a))

Brake lever not releasing correctly knotchy in operation (1.1.2 (b) (i))

Front Tyre worn close to the legal limit 1.25mm (5.2.3 (e))

Registration plate deteriorated but not likely to be misread (0.1 (b))

clutch lever pivot bolt nut missing

Front Tyre worn close to the legal limit front tyre is on the limit now, just above 1mm (5.2.3 (e))

Offside Rear Brake linkage has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f))

Offside Rear Brake rod has restricted free movement (1.1.15 (e))

Rear Brake pivot has restricted free movement drum brake lever sticking on (1.1.15 (e))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Nearside Front Lower Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front Footrest slightly loose bracket bolts (6.2.12 (a))

Front Headlamp aim too low (4.1.2 (a))

Front Brake caliper corroded but not seriously weakened binding slightly (1.1.16 (d) (i))

Front Brake hose slightly deteriorated out sleeve perishing (1.1.12 (b) (ii))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Shock absorber has a slightly worn bush poor damping (5.3.2 (c))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Nearside Front Roller brake test indicates a sticking brake (3.3.A1a)

Offside Front Throttle operating incorrectly (6.2.1f)

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Nearside drive chain has clip type link

Offside Exhaust noisy exhaust end cans not standard (7.1.2)

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nearside drive chain has clip type link

Offside Exhaust noisy exhaust end cans not standard (7.1.2)

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Rear Wheel alignment slightly misaligned. (2.5.1)