1996 Mazda Bongo

General corrosion around vehicle.

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Horn not working (7.7 (a))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outrigger (7.1.1 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Front Crossmember rearward NSF (6.1.1 (c) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering component has slight seepage from a component steering rack (2.1.5 (a))

Exhaust has a major leak of exhaust gases back box (6.1.2 (a))

Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Horn not working (7.7 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering component has slight seepage from a component steering rack (2.1.5 (a))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front inner sill

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front inner sill

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Headlamp not working on main beam when you put main on whole light cluster goes out (4.1.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside inner sill corroded

Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Offside inner sill corroded

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Headlamp aim projected beam image is obviously incorrect lens misty (4.1.2 (c))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect lens misty (4.1.2 (c))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Rear Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Anti-roll bar linkage missing (5.3.3 (a) (ii)) DANGEROUS

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))

Exhaust has a minor leak of exhaust gases rear of rear silencer deteriorating (7.1.2)

Offside rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. low efforts (3.7.B.6b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

o/s/r inner sill rusted and holed through corrsion

front and rear discs rusted and pads appear low

Nearside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Horn not working (1.6.2a)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)

Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.4.B.1)

Horn not working (1.6.2a)

Nearside Front Headlamp aim too low (1.8)

Offside Front Headlamp aim too low (1.8)

Nearside Rear passenger seat cannot be secured in the upright position. (6.2.3)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Tyre worn close to the legal limit (4.1.E.1)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Tyre worn close to the legal limit (4.1.E.1)

Battery insecure

Exhaust has part of the system slightly deteriorated (7.1.1a)

rear crossmember ruty and holed but out side of prescribed area

All position lamps not working (1.1.A.3b)

Front brake disc excessively pitted (3.5.1h)

Nearside Front Windscreen wiper not operating automatically when switched on (8.2.1b)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper not operating automatically when switched on (8.2.1b)

Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear fog lamp missing (1.3.2a)

Rear brake disc excessively pitted (3.5.1h)

Registration plate lamp not working (1.1.5c)

Battery insecure

Exhaust has part of the system slightly deteriorated (7.1.1a)

rear crossmember ruty and holed but out side of prescribed area