2006 Mazda Bongo

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre worn close to legal limit/worn on edge inner and outer edges (5.2.3 (e))

offside outer sill corroding

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill, several holes along length of vehicle (6.1.1 (c) (i))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill, several holes along length of vehicle (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge worn on outer edge (5.2.3 (e))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge worn on outer edge (5.2.3 (e))

Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Under tray fitted

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Towbar excessively corroded within 30cm of towbar mounting chassis (6.1.6 (i) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Under tray fitted

Nearside Front Lower Macpherson strut ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Lower Macpherson strut ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

underside rusty

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

front cross member corroded

Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sill (2.4.A.3)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

front cross member corroded

Front Lower cross member corroded but not near or affecting body mounts

Body has slight corrosion (6.1.B.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

front cross panel under radiator heavly corodid

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc slightly pitted (3.5.1h)

Nearside Rear brake disc slightly pitted (3.5.1h)

Offside Front brake disc slightly pitted (3.5.1h)

Offside Rear brake disc slightly pitted (3.5.1h)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front position lamp(s) not working (1.1.A.3b)

Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Registration plate lamp not working (1.1.5c)

Front Brake pad(s) wearing thin (3.5.1g)