1996 Mazda Bongo

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Underside of vehicle has been covered in sealer

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Valve stem seriously damaged (5.2.3 (j)) DANGEROUS

Offside Front Valve stem slightly damaged (5.2.3 (j))

Brake pipe corroded, covered in grease or other material all coated in black underseal (1.1.11 (c))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)

Nearside Rear Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Headlamp has a product on the light source but not seriously reducing light output (1.7.5a)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear bumper insecure

Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Battery insecure (1.9.1)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

radiator leaking

Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear bumper insecure

Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Seat belt anchorage prescribed area is severely distorted (5.2.6)

Coolant leak

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear fog lamp not working (1.3.2b)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Rear fog lamp not working (1.3.2b)

as previous test. cert.no.143239606196

Nearside Outer Front Front constant velocity joint is insecure (2.5.C.1b)

Rear Rear fog lamp not working (1.3.2b)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc slightly scored (3.5.1h)

oil leak