MOT Status
ExpiredMileage
126,282 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sills (6.1.B.2)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sills (6.1.B.2)
Offside Front Headlamp aim too low (1.8)
Offside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Body has slight corrosion rear floor (6.1.B.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Rear coil spring corroded (2.4.C.1b)
brake fluid level low warning light on
Nearside Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
condition of steering wheel
exhaust mount loose
Anti-roll bar rubber bush deteriorated resulting in excessive movement both rear d bushes (2.4.G.2)
Vehicle structure has excessive corrosion which adversely affects braking or steering o/s floor to sill (6.1.A.1)
Nearside Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
condition of steering wheel
exhaust mount loose
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front coil spring corroded (2.4.C.1b)
Offside Lower Vehicle structure has slight corrosion (6.1.B.2)
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear coil spring corroded (2.4.C.1b)
Oil leak
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Vehicle's internal headlight adjuster altered to recheck lights
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front coil spring corroded (2.4.C.1b)
Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front coil spring corroded (2.4.C.1b)
Oil leak
minor exhaust gas leak from centre to rear box joint
slight ruffness in o/s/f top suspension mount bearing
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Oil leak
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
Offside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Oil leak
Anti-roll bar has slight play in a ball joint (2.4.G.2)
Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Anti-roll bar has slight play in a ball joint (2.4.G.2)
Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Headlamp not working on main beam (1.7.5a)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Headlamp aim too low (1.8)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim too high (1.8)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Headlamp aim too low (1.8)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Centre Exhaust system not adequately supported (7.1.1)
Nearside Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Brake warning lamp on.
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P813 PHR is a 1996 Mazda 323 in White with a 1,489cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 61.1%.
Across all 1996 Mazda 323 models, the average MOT pass rate is 64.7% with a typical mileage of 96,639 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying P813 PHR, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 30 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P813 PHR?
You can check the full history of P813 PHR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P813 PHR registered?
P813 PHR is a 1996 Mazda 323, first registered on 30 September 1996.
Is P813 PHR safe to buy?
The MOT history for P813 PHR shows 18 tests with a 61.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P813 PHR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P813 PHR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.