2006 Mazda Bongo

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake pipe excessively corroded N/S FRONT METAL BRAKE PIPE TO FLEXI CORRODED (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength N/S REAR INNER SILL CORRODED AND HOLED (5.3.6 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Trailer electrical socket insecure (4.10 (a) (i))

Emissions not tested (8.2.2.2 (e))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Lower Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Lower Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Trailer electrical socket insecure (4.10 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Nail in tyre ()

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

previous repairs & underseal on chassis

Brake performance not tested (1.2.1 (g))

Front Body panel corroded and likely to cause injury wings (6.2.1 (a) (i))

Front Headlamp not working on dipped beam both sides (4.1.1 (a) (ii))

Front Headlamp not working on main beam both (4.1.1 (a) (ii))

Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced under rad (6.1.1 (c) (i))

Headlamp aim not tested (4.1.2 (b))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outter sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outter sill (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both inner wheel arch (5.3.6 (a) (i))

Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both inner sills (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both rear inner wheel arches (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Nail in tyre ()

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

O/S outer sill corroded not in prescribed area

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Oil leak

Front Electrical wiring insecure (1.9.2a)

Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Subframe mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Nearside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1) DANGEROUS

Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Engine covers fitted obscuring some components in the engine bay

Oil leak

Under-trays fitted obscuring some underside components

Electrical wiring insecure (1.9.2a)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Radius arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Radius arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2) DANGEROUS

Nearside Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

front cross member supporting radiator badly corroded

offside front brake hose retaining clip slightly miss aligned

Nearside Front Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

Offside Front Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

n/s and o/s rear wheel arches rusty

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

Offside Front Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

rear outer wheel arches rusty

Emissions not tested (7.0)

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Rear rear brake binding (3.7.B.1)

Offside Rear rear brake binding (3.7.B.1)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

uneven wear offside rear disc

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Windscreen wiper blade deteriorated (8.2.2)

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)