1997 Mazda Bongo

Exhaust has a minor leak of exhaust gases rear silencer (6.1.2 (a))

Front Anti-roll bar ball joint dust cover severely deteriorated both drop links upper boots (5.3.4 (b) (i))

Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced both brackets (5.3.3 (b) (i))

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both links (5.3.4 (a) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both D bushes (5.3.4 (a) (i))

Vehicle structure is repaired but structural rigidity is not significantly reduced both sides inner sills (6.1.1 (d) (i))

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement d bush brackets corroded (5.3.4 (a) (i))

Rear Exhaust has a minor leak of exhaust gases back box blowing but not execsive (6.1.2 (a))

Vehicle structure is repaired but structural rigidity is not significantly reduced inner sills (6.1.1 (d) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Exhaust has a minor leak of exhaust gases rear silencer (6.1.2 (a))

Windscreen washer provides insufficient washer liquid (3.5 (a))

outer sills correded

underbody corrosion o/s/f n/s/f o/s/r and n/s/r

Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Nearside Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

outer sills correded

underbody corrosion o/s/f n/s/f o/s/r and n/s/r

Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mounting (5.3.6 (a) (i))

Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive inner sill corroded (7.1.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Horn not working (7.7 (a) (ii))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement inner front (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement inner front (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)

Registration plate lamp not working (1.1.C.1d)

o/s sill slight corrosion

underside of vehicle slight corrosion

Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

o/s sill slight corrosion

underside of vehicle slight corrosion

Nearside Front Tyre worn close to the legal limit 2.5mm 215/65/15 (4.1.E.1)

n/s wiper blade perished

n/s/f sill corroded - not within a prescribed area

n/s/f tyre valve perished

n/s/f tyre worn on outer edge

o/s/f tyre valve perished

underside of vehicle slightly corroded

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

both front tyre valves slightly perished

Oil leak

hole in n/s/f sill but not in perscribed area

Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Oil leak

hole in n/s/f sill but not in perscribed area

Items removed from driver's view prior to test

Under-trays fitted obscuring some underside components

both rear tyres slightly perished

front brake discs slightly pitted

o/s wiper blade slightly deteriorated

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Rear fog lamp tell tale not working (1.3.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Items removed from driver's view prior to test

Under-trays fitted obscuring some underside components

both rear tyres slightly perished

front brake discs slightly pitted

o/s headlight aim not tested, needs to be tested at time of retest

o/s wiper blade slightly deteriorated

Nearside Outer Front Tyre worn close to the legal limit (4.1.E.1)

Offside Outer Front Tyre worn close to the legal limit (4.1.E.1)

oil around nearside rear hub

Horn not working (1.6.2a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Both front tyres wearing on outer edges.

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Brake pad(s) wearing thin (3.5.1g)