MOT Status
ValidMileage
179,136 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Headlamp lens slightly defective both (4.1.1 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis, near shock absorber mounting (5.3.6 (a) (i))
Offside Front Tyre obviously under inflated (5.2.3 (l))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis, near shock absorber mounting (5.3.6 (a) (i))
Oil leak, but not excessive gearbox oil pipe (8.4.1 (a) (i))
radiator support corroded at offside
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Headlamp lens slightly defective both (4.1.1 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Oil leak, but not excessive gearbox oil pipe (8.4.1 (a) (i))
radiator support corroded at offside
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front wheel tight to rotate by hand
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Windscreen wiper blade defective (3.4 (b) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
rear wiper torn
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 195/70r15c (5.2.3 (d) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front wheel tight to rotate by hand
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Windscreen wiper blade defective (3.4 (b) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
rear wiper torn
Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Coil spring corroded Both Rear (5.3.1 (b) (i))
Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Rear fog lamp missing (4.5.1 (a) (ii))
Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Coil spring corroded Both Rear (5.3.1 (b) (i))
Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Headlamp has a product on the light source so that the light output is severely reduced LENS MISTED (4.1.4 (b))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL HOLED (6.2.2 (d) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp has a product on the light source so that the light output is severely reduced LENS MISTED (4.1.4 (b))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Central Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement drop link (5.3.4 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material Slightly corroded in places. (1.1.11 (c))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill corroded and damaged. (6.1.1 (c) (i))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill corroded and damaged. (6.1.1 (c) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Rear fog lamp likely to become detached (4.5.1 (c) (ii))
Offside Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Headlamp has a product on the lens so that the light output is severely reduced both front (1.7.5a)
Nearside Registration plate lamp not working (1.1.C.1d)
Rear fog lamp missing (1.3.2a)
Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Nearside rear brake binding (3.7.B.1)
Rear Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)
Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear fog lamp not working (1.3.2b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
advise rear brakes
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)
Nearside Rear Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)
Nearside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P860 UCA is a 1996 Mazda Bongo in Green with a 2,490cc diesel engine. This vehicle has been through 36 MOT tests with a personal pass rate of 58.3%.
Across all 1996 Mazda Bongo models, the average MOT pass rate is 65.9% with a typical mileage of 133,482 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying P860 UCA, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 30 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of P860 UCA?
You can check the full history of P860 UCA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P860 UCA registered?
P860 UCA is a 1996 Mazda Bongo, first registered on 1 September 1996.
Is P860 UCA safe to buy?
The MOT history for P860 UCA shows 36 tests with a 58.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P860 UCA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P860 UCA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.