2007 Mazda Bongo Friendee

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Windscreen damaged but not adversely affecting driver's view wiper sweep has light scratching (3.2 (a) (i))

Oil leak, but not excessive engine oily (8.4.1 (a) (i))

Rear both rear bump stops missing

Horn not working (7.7 (a))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill panel holed (5.3.6 (a) (i))

Nearside Rear Outer Other passenger door cannot be opened from outside the vehicle handle broken (6.2.3 (a))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill panel holed (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill panel holed (5.3.6 (a) (i))

Offside Rear Rear fog lamp not working & lens broken (4.5.1 (a) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Central Rear Upper Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Windscreen damaged but not adversely affecting driver's view has light scratch on wiper sweep (3.2 (a) (i))

Oil leak, but not excessive engine oily (8.4.1 (a) (i))

Rear both rear bump stops missing

under body corrosion

Oil leak, but not excessive (8.4.1 (a) (i))

heavy undebody corroison

Fluid leak harmful to the environment or a risk to other road users coolant (8.4.1 (a) (i))

Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced rear of arch (6.1.1 (c) (i))

Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Body component damaged and likely to cause injury light lens (6.2.1 (a) (i))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced panel (6.1.1 (c) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front of arch (6.1.1 (c) (i))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced corner panel behind bumper (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced panel (6.1.1 (c) (i))

Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

heavy underbody corrosion

Front Tyre worn close to legal limit/worn on edge both - 195/65/15 (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Tyre worn close to legal limit/worn on edge both - 195/65/15 (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Tyre worn close to legal limit/worn on edge both - 195/65/15 (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Tyre worn close to legal limit/worn on edge both - 195/65/15 (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Power steering ram leaking rack seals (2.1.5 (a))

Front Inner Brake pad(s) less than 1.5 mm thick both sides (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Play in steering rack inner joint(s) ()

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Upper bump stop missing

Offside Rear Upper bump stop missing

Suspension component mounting repair covered in underseal all underside (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))

Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive trailing arm area (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive trailing arm area (5.3.6 (a) (i))

Offside battery tray rusty

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering component has slight seepage from a component rack ends (2.1.5 (a))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Headlamps matched pair incorrect colour (4.1.4 (a))

Nearside Rear Anti-roll bar pin or bush excessively worn d-bush (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush excessively worn d-bush (5.3.4 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive trailing arm area (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive trailing arm area (5.3.6 (a) (i))

Offside battery tray rusty

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering component has slight seepage from a component rack ends (2.1.5 (a))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak ()

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Rear fog lamp not working (1.3.2b)

HIGH LEVEL BRAKE LIGHT NOT WORKING

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Rear fog lamp not working (1.3.2b)

HIGH LEVEL BRAKE LIGHT NOT WORKING

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

nearside rear tyre worn on inner edge

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)

Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

all valve stems perishing

o/s front tyre outer walls perishing

rear wiper split