1996 Renault Master

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Shock absorbers has a slightly worn bush n/s and o/s (5.3.2 (c))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement n/s and o/s (5.3.4 (a) (i))

Rear Shock absorbers has a slightly worn bush n/s and o/s (5.3.2 (c))

Central Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Fuel hose leaking to tank (6.1.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Quarter panel (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis inner (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Quarter panel (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both front (5.3.4 (a) (i))

Multiple front sections of underbody corroded but not within prescribed areas

Oil leak, but not excessive (8.4.1 (a) (i))

Shock absorbers has a slightly worn bush Both rear (5.3.2 (c))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Steering component mounting prescribed area is excessively corroded (2.1.2 (e) (i))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Rear Registration plate inscription illegible (0.1 (b))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

under body heavily corroded but not main chassis

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Central Exhaust has a minor leak of exhaust gases section (6.1.2 (a))

under body corrosion

Front Subframe mounting prescribed area is corroded but not considered excessive offside nearside cross member (5.3.6 (a) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner wheel arch (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner wheel arch (6.1.1 (c) (i))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

rear brake application uneven 47% (3.7.B.2)

All tyres have cracking on side wall

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded as marked (2.4.A.3)

Offside Headlamp not working on main beam (1.7.5a)

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Offside Rear Suspension spring mounting prescribed area is excessively corroded as marked (2.4.A.3)

rear brake application uneven 53% nearside lowest (3.7.B.2)

All tyres have cracking on side wall

Side members where steps attach badly corroded

Offside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

front offside tyre outer wall cracking

Registration plate lamp not working (1.1.C.1d)

front brake application uneven (3.7.B.2)

front brake binding (3.7.B.1)

front offside tyre outer wall cracking

Nearside Front front brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Registration plate lamp not working (1.1.C.1d)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Offside Suspension arm has excessive play in a pin/bush (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Coolant leak