MOT Status
ExpiredMileage
409,828 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake hose slightly deteriorated (3.6.B.4d)
Brake pipe slightly corroded (3.6.B.2c)
Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)
Oil leak
Parking brake lever has little reserve travel (3.1.6b)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
o/r/s inner tyre flat
Nearside Stop lamp not working (1.2.1b)
Offside Front Headlamp aim too low (1.8)
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Direction indicator incorrect colour (1.4.A.2f)
Nearside Rear Direction indicator insecure (1.4.A.2b)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear position lamp(s) insecure (1.1.A.3a)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Steering rack insecure (2.2.B.1a)
Nearside Stop lamp insecure (1.2.1a)
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Direction indicator insecure (1.4.A.2b)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear position lamp(s) insecure (1.1.A.3a)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Stop lamp insecure (1.2.1a)
Parking brake: efficiency below requirements (3.7.C.1b)
Registration plate lamp not working (1.1.C.1d)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Offside Stop lamp not working (1.2.1b) DANGEROUS
Brake hose slightly deteriorated (3.6.B.4d)
Brake pipe slightly corroded (3.6.B.2c)
Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Direction indicator deteriorated, but still visible from a reasonable distance (1.4.A.2e)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)
Oil leak
Parking brake lever has little reserve travel (3.1.6b)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
o/r/s inner tyre flat
roof light insure
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
VEHICLE IS MARKED IN DOOR AS 4600KG, I SPOKE TO BOB HALL (VOSA) AND HE ADVISED ME TO TEST AS CLASS 7, WHICH IS WHAT THE LOG BOOK SAYS. CUSTOMER SHOULD TRY TO GET A NEW V.I.N PLATE.
both front lower ball joint dust covers missing
nearside front indicator has outer cover missing
nearside front inner wing corroded
slight lift in nearside front lower ball joint
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Emissions not tested (7.0)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)
Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)
Hazard warning switch faulty (1.4.B.1d)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Rear Lower Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Lower Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust has part of the system excessively deteriorated (7.1.1a)
Rear registration plate dirty (6.3.1d)
VEHICLE IS MARKED IN DOOR AS 4600KG, I SPOKE TO BOB HALL (VOSA) AND HE ADVISED ME TO TEST AS CLASS 7, WHICH IS WHAT THE LOG BOOK SAYS. CUSTOMER SHOULD TRY TO GET A NEW V.I.N PLATE.
both front lower ball joint dust covers missing
nearside front indicator has outer cover missing
nearside front inner wing corroded
slight lift in nearside front lower ball joint
Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear position lamp(s) incomplete (1.1.4a)
Nearside Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Direction indicator not working (1.4.A.2c)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Registration plate lamp not fitted (1.1.C.1b)
Service brake: efficiency below requirements (3.7.B.7)
How Reliable is the Mercedes-benz 412 D?
Based on 7,130 MOT tests across 942 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P87 KJA is a 1996 Mercedes-benz 412 D in White with a 2,900cc diesel engine. This vehicle has been through 7 MOT tests with a personal pass rate of 57.1%.
Across all 1996 Mercedes-benz 412 D models, the average MOT pass rate is 65.6% with a typical mileage of 260,198 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz 412 D fails its MOT is parking brake: efficiency below requirements, accounting for 771 recorded failures. If you're considering buying P87 KJA, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz 412 D typically stays on UK roads for around 30 years. At 30 years old, this Mercedes-benz 412 D is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of P87 KJA?
You can check the full history of P87 KJA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P87 KJA registered?
P87 KJA is a 1996 Mercedes-benz 412 D, first registered on 29 August 1996.
Is P87 KJA safe to buy?
The MOT history for P87 KJA shows 7 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P87 KJA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P87 KJA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.