1998 Vauxhall Movano

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Windscreen washer not working both side (3.5 (a))

Front Windscreen wiper does not clear the windscreen effectively both rubber missing (3.4 (b) (ii))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Brake pipe excessively corroded one pipe (1.1.11 (c))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Exhaust system insecure joint and leaking (6.1.2 (a))

Rear Registration plate incorrect (0.1 (c))

Rear Stop lamp(s) adversely affected by the operation of another lamp both side (4.3.3 (b))

Service brake efficiency below requirements (1.2.2 (a) (i))

Rear Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (c))

Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (c))

Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Non obligatory mirror damaged ()

under body surface corrosen

Front Windscreen washer not working both side (3.5 (a))

Nearside Front Seat belt buckle not functioning as intended (7.1.2 (d))

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Front Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i))

Rear Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Brake load sensing valve missing where fitted as standard (1.1.17 (d)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

under body surface corrossen

Brake load sensing valve has been disconnected and was fitted as standard (3.6.E.2)

Brake load sensing valve inoperative (3.6.E.3)

Brake load sensing valve seized (3.6.E.3)

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nail in nearside front tyre

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Body has a sharp edge caused by damage (6.1.C.1)

Nearside Front Brake pipe inadequately clipped (3.6.B.1)

Nearside Rear Body has a projection caused by corrosion (6.1.C.1)

Nearside Rear Body has a projection caused by damage (6.1.C.1)

Offside Front Brake pipe inadequately clipped (3.6.B.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear rear brake application uneven (3.7.B.2)

Service brake: efficiency below requirements (3.7.B.7)

Nail in nearside front tyre

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Lower Ball joint has slight play (2.2.B.1f)

Nearside Front Seat belt locking mechanism does not secure or release (5.2.5a)

Nearside rear brake grabbing severely (3.7.A.5b)

Offside Front Lower Ball joint has excessive play (2.2.B.1f)

Offside Rear Tyre(s) incorrect because tyres with different structures are fitted across the same axle (4.1.A.2a)

Windscreen washer provides insufficient washer liquid (8.2.3)

rear brake application uneven (3.7.B.2)

Nearside Front Lower Ball joint has slight play (2.2.B.1f)

Offside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Rear Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Brake pedal anti-slip provision missing (3.3.A.1b)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Brake load sensing valve linkage seized (3.6.E.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

both rear tyres slightly perrised

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

both rear tyres slightly perrised

Brake pedal anti-slip provision missing (3.3.A.1b)

Centre Stop lamp not working (1.2.1b)

Nearside Front Seat belt locking mechanism does not secure or release (5.2.5a)

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)