1996 Rover 420

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Stop lamp not working (1.2.1b)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Fuel pipe/s corroded

Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)

Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Steering rack damaged but serviceable (2.2.C.1d)

Vehicle structure has slight corrosion (6.1.A.1)

outer sills covered with plastic trim

rear number plate de facing

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper not operating over a large enough area to give an adequate view (8.2.1c)

Offside Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brakes imbalanced across an axle (3.7.B.5b)

Front registration plate missing (6.3.1a)

Offside Front Headlamp aim too high (1.8)

Offside Rear Registration plate lamp not working (1.1.5c)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside front brake juddering slightly (3.7.A.2b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too low (1.8)

Nearside Registration plate lamp not working (1.1.5c)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside front brake juddering slightly (3.7.A.2b)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)