1997 Mazda Bongo

Oil leak, but not excessive (8.4.1 (a) (i))

slight oil mist around osf steering rack gaitor

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Front Service brake excessively fluctuating (1.2.1 (e))

Offside Front Service brake excessively binding (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

slight oil mist around osf steering rack gaitor

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rust holes in inner sills but not in a prescribed area and not effecting overall strength of the vehicle

Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Headlamp lens seriously defective (4.1.1 (b) (ii))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rust holes in inner sills but not in a prescribed area and not effecting overall strength of the vehicle

Offside Rear Tyre slightly damaged/cracking or perishing tread (5.2.3 (d) (ii))

oil leak

coolant leak

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

coolant leak

Oil leak, but not excessive (8.4.1 (a) (i))

corrosion forming on inner and outer sill panels

Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

corrosion forming on inner and outer sill panels

Corrosion in offside and nearside inner sills

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Corrosion in offside and nearside inner sills

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Exhaust has a major leak of exhaust gases center (6.1.2 (a))

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

rear tyres worn on inner edges and near wear band indicators

Engine covers fitted obscuring some components in the engine bay

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Under-trays fitted obscuring some underside components

engine oil leaks

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

brake pedal anti slip slight wear

Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

brake pedal anti slip slight wear

Oil leak

Oil leak

Front registration plate incorrect (6.3.1a)

Rear registration plate incorrect (6.3.1a)

Oil leak

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Rear fog lamp missing (1.3.2a)

Parking brake lever has no reserve travel (3.1.6b)

Rear fog lamp switch missing (1.3.1a)

Rear fog lamp tell tale not working (1.3.1b)

Service brake: efficiency below requirements (3.7.B.7)