1997 Land Rover Discovery

body mounts becoming week with corrosion

rear bump stops missing

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting infront of rear wheel (6.2.2 (d) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

body mounts becoming week with corrosion

rear bump stops missing

Front Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Shock absorber has an excessively worn bush (2.7.4)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Shock absorber has an excessively worn bush (2.7.4)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

floor panels behind front wheels corroded

rear floor corroded but no seats or seat belts fitted

rear shocks bottom bushes worn

steering box wet with oil

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in front of rear wheel (6.1.B.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings in front of rear wheel (6.1.B.2)

body mounts in front of rear wheels becomming corroded

rear floor corroded but no seats or seatbelts fitted

Nearside Front Seat belt retracting mechanism defective (5.2.5b)

Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Rear Direction indicator not working (1.4.A.2c)

Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

body mounts in front of rear wheels becomming corroded

rear floor corroded but no seats or seatbelts fitted

Nearside Front Seat belt cut but not affecting the operation of the belt (5.2.2a)

Offside Ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

rear shock bushes worn

Front registration plate deteriorated (6.3.1d)

Fuel system component leaking (7.2.3)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Rear fog lamp not working (1.3.2b)

Offside Rear position lamp(s) not working (1.1.A.3b)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

front bottom part of bumper is missing

rear brake pads wearing thin

rear shock bushes worn

front tyres have slight cuts in tread and side walls

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Rear Body has a sharp edge caused by damage (6.1.C.1)

Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Lower Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Oil leak

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

front exhaust flex in poor condition

n/s/r seat belt buckle plastic cover missing

N/S/R seat belt buckle broken but working

O/S/F wiper blade starting to split

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Exhaust has part of the system excessively deteriorated (7.1.1a)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Rear Brake pipe excessively corroded (3.6.B.2c)

N/S/R seat belt buckle cover broken but working

Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)