2008 Toyota Granvia

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Items removed from driver's view prior to test SAT NAV MOUNT

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Offside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Offside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Offside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Position lamp not working (4.2.1 (a))

Nearside Rear Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brake hose slightly deteriorated both front hoses (3.6.B.4d)

front axle lower mount deteriorated

Exhaust system not adequately supported (7.1.1)

Nearside Front Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Subframe mounting prescribed area is excessively corroded lower crossmember (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is severely distorted within 30cm of antiroll mount mounting bolt (2.4.A.3)

Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Front Tyre has ply or cords exposed outer sidewall damage (4.1.D.1b)

Offside Front Subframe mounting prescribed area is excessively corroded lower crossmsmber (2.4.A.3)

Brake hose slightly deteriorated both front hoses (3.6.B.4d)

Suspension component mounting prescribed area is corroded but not considered excessive both rear chassis legs (2.4.A.3)

drill hole in n/s/f outer body sill

front axle lower mount deteriorated

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

offside front tyre devoid of tread on inner edge

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Rear Body has a sharp edge caused by damage (6.1.C.1)

Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Offside Stop lamp not working (1.2.1b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

offside front tyre devoid of tread on inner edge

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Stop lamp not working (1.2.1b)

Offside Rear position lamp(s) not working (1.1.A.3b)

ADVISE, general corrosion taking place to underside of vehicle.

ADVISE, nearside front outer c v gaitor perishing & cracking.

Nearside Front position lamp(s) incorrect colour (1.1.A.3e)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front position lamp(s) incorrect colour (1.1.A.3e)

ADVISE, general corrosion taking place to underside of vehicle.

ADVISE, nearside front outer c v gaitor perishing & cracking.

Engine covers fitted obscuring some components in the engine bay

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear Rear reflector slightly damaged but function not impaired (1.5.1c)

Offside Front Tyre worn close to the legal limit (4.1.E.2a)

Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

Rear bumper insecure

Under-trays fitted obscuring some underside components

o/s/f tyre sidewalls perised

Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

o/s rear tyre slightly worn on inner edage