2006 Mazda Bongo

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill near jacking point (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Can see from wheel arch (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength outer rigger (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength hole above previous weld (5.3.6 (a) (i))

Offside Rear Anti-roll bar ball joint excessively worn play (5.3.4 (a) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Anti-roll bar attachment bracket/mounting missing no D bush (5.3.3 (a) (ii)) DANGEROUS

Nearside Front Inner Tyre worn close to legal limit/worn on edge inner wear (5.2.3 (e))

Offside Rear Rear fog lamp insecure (4.5.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust has a minor leak of exhaust gases Back box (6.1.2 (a))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear fog lamp insecure (4.5.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge worn to zero on inner edge (5.2.3 (e))

Power steering component has slight seepage from a component damp noted around steering rack (2.1.5 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i))

Offside Rear fog lamp does not face the rear (4.5.4 (a))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge worn to zero on inner edge (5.2.3 (e))

Power steering component has slight seepage from a component damp noted around steering rack (2.1.5 (a))

Items removed from driver's view prior to test ()

Power steering component has slight seepage from a component from steering rack (2.1.5 (a))

battery held down with cable tie

front cross member and both outer sills corroded

rear cross member holed and corroded outside prescribed areas

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sill (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps both (4.7.1 (b) (ii))

Items removed from driver's view prior to test ()

Power steering component has slight seepage from a component from steering rack (2.1.5 (a))

battery held down with cable tie

front cross member and both outer sills corroded

rear cross member holed and corroded outside prescribed areas

Battery insecure both (1.9.1)

Brake pedal anti-slip provision incomplete (3.3.A.1b)

Electrical wiring inadequately supported under car (1.9.2a)

Electrical wiring insecure under bonnet (1.9.2a)

Nearside Front Brake hose bulging under pressure (3.6.B.3)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded several places (2.4.A.3)

Offside Front Brake hose bulging under pressure (3.6.B.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded several places (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear fog lamp not working (1.3.2b)

Registration plate lamp not working (1.1.C.1d)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Tyre worn on inside edge

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Battery insecure (1.9.1)

Offside Rear Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)

Rear fog lamp tell tale not working (1.3.1b)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Tyre worn on inside edge

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

light wiper mark in zone A and B

offside front tyre worn on inside edge

rear seats facing to rear

Nearside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear fog lamp tell tale not working (1.3.1b)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

light wiper mark in zone A and B

offside front tyre worn on inside edge

rear seats facing to rear

Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)

rear passanger seats have been removed at the time of test

Battery insecure (1.9.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Rear Statutory seat belt missing (5.1.1)

Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)

floor and sills slightly corroded

front and rear pads wearing thin

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar linkage missing (2.4.G.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Registration plate lamp not working (1.1.C.1d)

Rear fog lamp not working (1.3.2b)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

centre/rear exhaust has a slight blow

front pads low

nearside number plate light has no shroud

offside front inner wing has some corrosion

rear row of seats not fitted at time of test

Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Outer Seat belt damaged sufficient to significantly weakened the webbing (5.2.2a)

Nearside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear registration plate deteriorated (6.3.1d)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

centre/rear exhaust has a slight blow

front pads low

nearside number plate light has no shroud

offside front inner wing has some corrosion

rear row of seats not fitted at time of test

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear fog lamp not working (1.3.2b)

all pads low

rear number plate slightly deteriorated

Horn not working (1.6.2a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Windscreen wiper blade deteriorated (8.2.2)

Offside Windscreen wiper blade deteriorated (8.2.2)

rust n/s/r chassis