1996 Mazda Bongo

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front sill lip slightly damaged

Offside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Rear Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))

Rear Rear fog lamp insecure (4.5.1 (c) (i))

general underbody and components corrosion

underbody and components wax oiled

Front Integral body structure is corroded but structural rigidity is not significantly reduced radiator support panel (6.1.1 (c) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Nearside Rear Floor not fully secure behind wheel at inner sill (6.2.4 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill in front of wheel (5.3.6 (a) (i))

Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill & outrigger (5.3.6 (a) (i))

Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Integral body structure is corroded but structural rigidity is not significantly reduced radiator support panel (6.1.1 (c) (i))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Nearside Rear Floor not fully secure behind wheel at inner sill (6.2.4 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill in front of wheel (5.3.6 (a) (i))

Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

corrosion developing underneath

underside thick with underseal/ paint

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Parking brake lever has little reserve travel (3.1.6b)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Headlamp aim not tested (1.8.A.1c)

Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Rear fog lamp not working (1.3.2b)

Offside Registration plate lamp not working (1.1.C.1d)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Parking brake lever has little reserve travel (3.1.6b)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Parking brake lever has no reserve travel (3.1.6b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Lower Anti-roll bar has slight play in a ball joint (2.4.G.2)

Oil leak

some corrosion forming underside

both headlamp aims very poor (image very poor)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Battery insecure (1.9.1)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bearing (2.4.G.2)

both headlamp aims very poor (image very poor)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Lower Suspension arm locating pin locking device missing (2.4.G.3b)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front All position lamps adversely affected by the operation of another lamp (1.1.A.3f)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front position lamp(s) incorrect colour (1.1.A.3e)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front All position lamps adversely affected by the operation of another lamp (1.1.A.3f)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) incorrect colour (1.1.A.3e)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)