1997 Saab 9000 Cs

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Exhaust mounting defective held up with wire (6.1.2 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

exhaust front pipe tied up with wire

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Brake hose excessively deteriorated (1.1.12 (b) (ii))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Brake hose excessively deteriorated (1.1.12 (b) (ii))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

exhaust front pipe tied up with wire

Nearside Front Anti-roll bar linkage slightly distorted (2.4.G.1)

Offside Front Anti-roll bar linkage slightly distorted (2.4.G.1)

Offside Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Exhaust system not adequately supported (7.1.1)

Offside Front Main beam 'tell-tale' not working Earth fault (1.7.4c)

Steering locking device insecure (2.2.C.1g)

Centre Rear Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)

Nearside Front Anti-roll bar linkage slightly distorted (2.4.G.1)

Offside Front Anti-roll bar linkage slightly distorted (2.4.G.1)

Offside Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

exhaust rubber broken

Nearside Front Tyre fouling a part of the vehicle (4.1.D.2)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

exhaust rubber broken

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Headlamp deteriorating i.e..image brightness

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Rear silencer support needs strenghtening...................@@'..................Thanx 4yur custom

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Headlamp adversely affected by the operation of another lamp (1.7.5c)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Track rod end loose (2.2.B.1d)

Headlamp deteriorating i.e..image brightness

Items removed from driver's view prior to test

Rear silencer support needs strenghtening...................@@'..................Thanx 4yur custom

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust system not adequately supported (7.1.1)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Front Exhaust system not adequately supported (7.1.1)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)