1996 Honda Cbr

All direction indicators not working (4.4.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

gear linkage has play in bush

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Rear Brake disc fractured (1.1.14 (a) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) DANGEROUS

Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

gear linkage has play in bush

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Tyre worn close to the legal limit (5.2.3 (e))

Stop lamp not working footpedal (4.3.1 (a) (ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Tyre worn close to the legal limit (5.2.3 (e))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Front Brake excessively binding (1.2.1 (f))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Front Tyre worn close to the legal limit (4.1.3(ii))

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Throttle operating incorrectly (6.2.1f)

Exhaust markings indicating not for road use or similar wording (7.1.4)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Exhaust markings indicating not for road use or similar wording (7.1.4)