1996 Honda Cbr

No lights fitted at time of test

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front suspension assembly component excessively misaligned (2.3.1)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear position lamp incorrect colour (1.1.2b)

Steering headbearing has excessive free play (2.2.2)

Throttle operating incorrectly (6.2.1f)

Clutch lever bent (6.2.1g)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front fender broken

Rear Brake pedal pivots slightly worn (3.1.3a)

Front brake lever is very rough in its operation.

Rear Rear shock absorber has a light misting (2.4.A.1c)

Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Headlamp aim too high (1.6)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Offside Front Direction indicator insecure (1.5.3b)

Rear Rear wheel bearings have excessive free play (2.4.A.2c)

Front brake lever is very rough in its operation.

Rear Rear shock absorber has a light misting (2.4.A.1c)

Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Exhaust is leaking and excessively noisey (7.1.1b)

Front Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Exhaust is leaking and excessively noisey (7.1.1b)

Front Front suspension has excessive stiffness in the suspension movement. (2.3.6b)

Front Front suspension has inadequate damping effect. (2.3.6c)

Front Headlamp aim too high (1.6)

Front Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Rear Rear suspension movement is excessively stiff (2.4.A.3b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nail in rear tyre