1996 Mazda Bongo

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

general age related corrosion rear

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Rear fog lamp tell-tale not working (4.9.1 (a) (ii))

Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

general age related corrosion rear

Front Brake pad(s) wearing thin both (1.1.13 (a) (ii))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis area (5.3.6 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill area (6.1.1 (c) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill area (6.1.1 (c) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis area (5.3.6 (a) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Exhaust system insecure (6.1.2 (a))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Valve stem seriously damaged (5.2.3 (j)) DANGEROUS

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill area (6.1.1 (c) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill area (6.1.1 (c) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis area (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust corroded/minor blow flexi

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

o/s sill corroded

headlamp images poor

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

headlamp images poor

o/s sill corroded

Direction indicators not working (1.4.A.2c)

Hazard warning lamps inoperative (1.4.B.1b)

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar attachment bracket/mounting cracked (2.4.G.1)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Windscreen washer provides insufficient washer liquid (8.2.3)

front brake excessively fluctuating (3.7.B.3)

Drive shaft noises driving

Front inner brake pads possibly worn out. N/S disc poor

Headlamp images very poor

N/S/F tyre worn on edges

No spare wheel

O/s/ outer sill heavily corroded

Play in both rear anti roll bar drop links.

Smells like fuel leaak?

both dip beams poor image

slight play in o/s/f drop link

Brake performance not tested (3.7.A.1)

Emissions not tested (7.0)

Nearside Rear Body has a sharp edge caused by damage (6.1.C.1)

Nearside Rear Wheel nut(s) loose (4.2.A.1e)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Body insecure and dangerous to other road users (6.1.B.1b)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear Stop lamp not working (1.2.1b)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Rear fog lamp missing (1.3.2a)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

both dip beam image poor

o/s/f tyre worn on inside edge

slight play in o/s/f drop link

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Stop lamp not working (1.2.1b)

Offside Front Body has a sharp edge caused by damage (6.1.C.1)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear fog lamp missing (1.3.2a)

Offside Stop lamp not working (1.2.1b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Registration plate lamp not working (1.1.C.1d)

both rear tyres worn on inside and outside edge

child seat poor fitting

damage to n/s/f and n/s/r tyre side walls

exhaust tail pipe missing

heavy corrosion in o/s/r sill

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear fog lamp insecure (1.3.2a)

Offside Rear fog lamp not working (1.3.2b)

both dip beam image poor

front brake pads low

rear brake pads low

both dip beams poor image

front brake pads look low

n/s/f tyre worn on outer edge

o/s/f tyre worn on outside and inside edge

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Stop lamp not working (1.2.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

both dip beams poor image

front brake pads look low

n/s/f tyre worn on outer edge

o/s/f tyre worn on outside and inside edge

Headlamp images poor

N/S battery insecure

Tyre pressures?

All tyres worn on edges . N/S/F very poor. Mointer

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Exhaust emits excessive smoke or vapour of any colour (7.4.B.4)

Offside Headlamp aim too low (1.8)

Rear Passenger's seat cannot be secured in the upright position. (6.2.A.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

all four tyres worn on inner and outter edges

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

n/s front & n/s rear tyres slightly worn on outer edges

Offside Rear fog lamp not working (1.3.2b)

Offside Windscreen wiper blade deteriorated (8.2.2)

Rear fog lamp tell tale not working (1.3.1b)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

ns cv gaiter leaking

ns rear and ns front tyre walls perishing and wearing thin on edges